When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3701-18PSTRAIGHT GRAB BAR, 18″ – PEENED
Features include cover that snaps over mounting flange dimples to conceal screws and concealed mounting flange of 31/8″ (79 mm) O.D. diameter with 2 screw holes and 3 locking dimples; 1/8″ (3 mm) thick, type 304 stainless steel. Cover is type 304 stainless steel with a satin finish and22 gauge, 3-3/16″ (81 mm) diameter.
Snap Flange (1-1/4″ O.D) Peened – Straight Grab Bar, 18”
ASI (10-3701-18P) Straight Grab Bar, 1-1/4\" OD, 18\" Long, Snap Flange, Peened
This snap flange grab bar is similar to the exposed mount grab bars, except that it has decorative flanges that snap over the mounting plates to conceal them. Like the exposed mount, it requires that the grab bar be held in place while it is attached to the wall using the appropriate fasteners (not included). Once this has been done, the flanges slide to the ends of the grab bar and snap securely in place over the mounting plates.
Higheset quality type 304 stainless steel alloy 18-8. 18 Guage thickness.
Mandrell bending process ensures uniform bar diameters.
Heliarc welding forms a single structural unit.
ADA Compliant (per CABO/ANSI A117.1-2003 and CFR 28 Part 36, 1 July 1994, section 4.26.3 and FAB-ADA-ABA Regulations of 23 July 2004, Section 609
Type:Straight Grab BarPrimary Material:Stainless SteelMount Type:Concealed (Snap Flange)Outside Diameter:1-1/4 inchRated Width:Not applicableRated Length:18\"Grip Type:Peened/TexturedFinish / Color:SatinLoad Capacity:250 Dimensions:21-1/8\" Wide x 3-1/8\" Tall x 2-3/4\" DeepNet Weight:2.1Shipping Dimensions:22\" Length x 4\" Width x 4\" HeightShipping Weight:2.6UPC / GTIN:Not publishedManufacturer\'s Part No.:10-3701-18PCountry of Manufacture:CN
Architectural Specifications:
1-1/4\" Diameter [Ø32] Grab Bar with Snap-On Flange Covers for concealed mounting shall be type 304 stainless steel alloy 18-8. Tubing shall be 1-1/4\" diameter [Ø32] x 18 gauge (0.048\") [1.2]. Snap-on cover shall be 22 gauge (0.03\") [0.8]. Flange shall be 1/8\" [3] thick and shall be heliarc welded to tubing with a continuous concealed bead. End flanges shall have two (2) 5/16\" diameter [Ø7.5] mounting holes. Center posts (if any) shall have (2) keyhole slots to ease installation access. All exposed surfaces shall have a satin finish and shall be protected during shipment with a plastic bag. For optional non-slip surface, add suffix –P (peened).
