Mikrotik cAP ac RBcAPGi-5acD2nD wireless access point International Version For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Mikrotik cAP ac RBcAPGi-5acD2nD wireless access point International Version:
$86.45

The cAP ac is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2 GHz 802.11b/g/n and 5 GHz in a/n/ас standards, and will provide coverage in 360 degrees around it.

Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ac supports 802.3af/at PoE input on the first port, and passive PoE output on the second port.

- cAP ac (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

By default, US versions are shipped to all orders that are shipped within the USA. As per the FCC regulations International version cannot be used in the USA unless with a valid license. The customer is responsible for ordering the correct version. You will be requested to sign FCC Authorization form after codeRBcAPGi-5acD2nDArchitectureARM 32bitCPUIPQ-4018CPU core count4CPU nominal frequency716 MHzDimensionsRound case: ⌀ 136 mm, height: 30 mm; Square case: 145 mm x 145 mm x 30 mmLicense level4Operating SystemRouterOSSize of RAM128 MBStorage size16 MBStorage typeFLASHTested ambient temperature-40 to 50° CPoweringDetailsMax Power consumption13WPoE in802.3af/atPoE outPassive PoE up to 57VPoE in input Voltage17-57 VNumber of DC inputs1 (PoE-IN)WirelessDetailsWireless 2.4 GHz number of chains2Wireless 2.4 GHz standards802.11b/g/nAntenna gain dBi for 2.4 GHz2Wireless 2.4 GHz chip modelIPQ-4018Wireless 5 GHz number of chains2Wireless 5 GHz standards802.11acAntenna gain dBi for 5 GHz2.5Wireless 5 GHz chip modelIPQ-4018EthernetDetails10/100/1000 Ethernet ports2Wireless specifications2.4 GHzTransmit (dBm)Receive GHzTransmit (dBm)Receive test resultsRBcAPGi-5acD2nDIPQ-4018 1G all port testModeConfiguration1518 byte512 byte64 (fast bridge filter (fast simple ip filter rules162.21969.8240.8986.3242.9124.4

All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

IPsec test resultsRBcAPGi-5acD2nDIPQ-4018 IPsec throughputModeConfiguration1400 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsSingle tunnelAES-128-CBC + SHA137.9424.559241.761.631.5256 tunnelsAES-128-CBC + SHA136403.238.5157.739.820.4256 tunnelsAES-128-CBC + SHA25636403.238.5157.739.820.4256 tunnelsAES-256-CBC + SHA134.4385.337.9155.239.820.4256 tunnelsAES-256-CBC + SHA25634.4385.337.9155.239.820.4

All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results