JAYO 10KG ABS-Like Resin 1KG/Set 405nm UV 4K 8K SLA DLP LCD 3D Printer Resin For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

JAYO 10KG ABS-Like Resin 1KG/Set 405nm UV 4K 8K SLA DLP LCD 3D Printer Resin:
$181.65

JAYO 3D Resin 405nm UV for LCD/DLP/SLA 3D-Resin PrinterParameter:

RGB LCD Screen：

Bottom Exposure:20-80s

Normal Exposure:4-15s

Monochrome Screen:

Bottom Exposure:10-60s

Normal Exposure:1.5-4s

Important Safety Instructions:

Shake the bottle before use
Recommended temperature 20°C - 25°C
Protect it from dust and direct sunlight
Keep it out of the reach of children.
Avoid skin and eye contact with liquid resin. Wash off immediately with plenty of water if resin gets on the skin.

Shore Hardness: 70-80D
Shrinkage: 6-8%
Flexural strength: 30±10%MPa
Extensibility: 20-35 Mpa
Elongation at break: 10 ±5%
Shelf life: 12 month

GreatFluidity
There is great fluidity of our JAYO ABS-Like Photopolymer Resin. It can infiltrate models fastly, which will improve print speed and reducing the forming time, bringing you quicker printing experience. You can get some printing models you need for a short time.HighToughness
Models printed by JAYO ABS-Like Resin brings high toughness. You can use the resin to print impact-resistant parts and apply it to mechanical assemblies. And the model is strong enough to take that accidental fall from time to time.HighHardness
JAYO ABS-Like Resin will bring you models with high hardness. Its hardness is enough to be some small parts that applied in your life. Using ABS-Like Resin, you can print some parts you need at any time, which is very convenient.HighPrecision
There is low shrinkage of our JAYO ABS Like Photopolymer Resin. It can print high precision models, which is with smooth surface and clear details. Using the resin to print beautiful decorations for your home is a good choice.