When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
The unit has been reset to the factory default settings. See console log INCLUDED IN THIS sale:• (1) - CISCO DS-C9148S-K9 MDS 9148S 16GBPS FC MULTILAYER FABRIC SWITCH 24-ACTIVE PORTS
• (2) - POWER CORD
REPLACEMENT or MONEY BACK GUARANTEE:When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.
ADDITIONAL INFORMATION:Cisco Nexus Operating System (NX-OS) Software
TAC support: http:/www.cisco.com/tac
Copyright (c) 2002-2022, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
IRV-MDS-SW01# 2024 Mar 26 13:18:27.318 IRV-MDS-SW01 %PMON-SLOT1-2-PMON_CRIT_INFO
: Port Monitor Critical Information: Config download success .
2024 Mar 26 13:18:28.339 IRV-MDS-SW01 %PMON-SLOT1-2-PMON_CRIT_INFO: Port Monitor
Critical Information: Policy (slowdrain) activation is successfull .
IRV-MDS-SW01# 2024 Mar 26 13:18:29.291 IRV-MDS-SW01 %PLATFORM-2-PS_OK: Power sup
ply 1 ok(Serial number QCS20442MER)
2024 Mar 26 13:18:29.292 IRV-MDS-SW01 %PLATFORM-2-PS_FANOK: Fan in Power supply
1 ok
2024 Mar 26 13:18:29.292 IRV-MDS-SW01 %PLATFORM-2-PS_OK: Power supply 2 ok(Seria
l number QCS20442N54)
2024 Mar 26 13:18:29.292 IRV-MDS-SW01 %PLATFORM-2-PS_FANOK: Fan in Power supply
2 ok
2024 Mar 26 13:18:29.293 IRV-MDS-SW01 %PLATFORM-2-FAN_OK: Fan module ok
2024 Mar 26 13:18:29.293 IRV-MDS-SW01 %PLATFORM-2-FAN_OK: Fan module ok
2024 Mar 26 13:18:29.294 IRV-MDS-SW01 %PLATFORM-2-FAN_OK: Fan module ok
2024 Mar 26 13:18:29.294 IRV-MDS-SW01 %PLATFORM-2-FAN_OK: Fan module ok
IRV-MDS-SW01# write erase
Warning: This command will erase the startup-configuration.
Do you wish to proceed anyway? (y/n) [n] y
IRV-MDS-SW01# reload
This command will reboot the system. (y/n)? [n] y
2024 Mar 26 13:18:46.191 IRV-MDS-SW01 %PLATFORM-2-PFM_SYSTEM_RESET: Manual syste
m restart from Command Line Interface
>> NX7--LC-loader-02.01.18 (Apr 6 2020 - 14:48:38), Build: 02.01.18
CPU0: 8572E, Version: 2.2, (0x80e80022)
Core: E500, Version: 3.0, (0x80210030)
Clock Configuration:
CPU:1066.672 MHz, CCB:533.336 MHz,
DDR:330 MHz (660 MT/s data rate) (Asynchronous), LBC:33.334 MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Board: 9046, IOFPGA: 0x0000001F, SPROM: 0xAB
Boot flash : Primary
I2C: ready
DRAM: Initializing
DDR: 4 GB
Skipping PCIe controller reset
FPGA asic init done
L2: 1024 KB enabled
Using default environment
PCIE2 connected to Slot 1 as Root Complex (base address ff709000)
Scanning PCI bus 01
PCIE2 on bus 00 - 03
In: serial
Out: serial
Err: serial
Net: INFO: Net boot mode = 1
INFO: Net boot mode = 1
INFO: Board will come up MGMT interface
INFO: MAC address is: 2c:5a:0f:a2:75:d0
eTSEC2 board phy 3
INFO: Net boot mode = 1
eTSEC2
USB: USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
IDE: Bus 0: OK
Device 0: Model: SSFD4GHYB9P1D001 Firm: FW981 Ser#: STP20470E4J
Type: Hard Disk
Capacity: 3907.9 MB = 3.8 GB (8003520 x 512)
Booting image ................
26390016 bytes read
NBI at 08000000 size 134217728
Booting image at addr 0x00800000 ...
Memory
