When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Cisco Wireless Access Point 1.3 Gbps Stand-Alone Dual Band Wi-Fi with Power Supply + PoE + Ethernet CableProduct
Plug & PlayREADYAfter Unboxing!
Open box. Connect Ethernet Cable from Cisco Access Point to a Router or Switch. Connect Genuine Cisco Power Brick. Boot Time approx. 90 Seconds. Look for and select \'CISCO-AP\' Wi-Fi SSIDon your Mobile Device and enter Default Passkey \'12345678\' to Join. Done.
Shipping
FREE Same-day Shipping Guaranteed
FREE Shipping within 24 hours Guaranteedto ALL Customers includingHawaii & Alaska during Weekdays if the Product is in Stock at our Facility, and the Order is Received by 2pm Eastern Time.
Contact
Documentation Included
Buyershall Receive Information in the Printed Product Guide Provided with the Shipped Order, including Product Instructionsand Links otherwise not allowed in this listing per policy.
SPECIAL OFFER
Every Order ships with a Refurbished Cisco Access Point, Genuine Cisco Power Brick, Power Cable, Ethernet Cable & Product Guidefor Immediate Use Out of the Box.
Upon Entering the Market, every Cisco Aironet 2700 Series Access Point Carried an MSRP Price Tag in excess of $1,000 USD each, and was Sold Exclusively thru Cisco Suppliers.
Today, You May Own a Cisco Autonomous or “Stand Alone” version of these Enterprise Controller-based Access Points for Less than 10% of its Original Cost with FREE Same-day Shipping throughout the U.S. including Hawaii & Alaska.
TECHNOLOGY
This Access Point is Built on 3x4:3(2.4GHz), 4x4:3(5GHz) MIMO RF Technologywith Integrated Antennae, Supports 802.11a,b,g,n,ac, and \"Wave 1\" 80 MHz Channel Bonding.
Each Unit Ships Pre-configured with Cisco\'s GenuineAutonomous Firmware which Allows for ConfigurationsRemotely using a Typical Desktop Web Browser. Although Not Recommended, the Firmware may be Flashed to Cisco\'s Controller-based Firmware but a Cisco Wireless LAN Controller would be Required for Deployment.
This Access Point has both Primary and Secondary Gigabit Ethernet Ports. The Primary Port is Gigabit Ethernet 0 and is the Backhaul Port. It also can be POE+ Powered by a RJ-45 Source Connection instead of Using the Included Cisco Power Brick.The Primary Port can be Set as a Trunk Port. The Secondary Port is Gigabit Ethernet 1, and is the Aux Port. You can Configure the Secondary Port to a VLAN ID.
Features and further details
The Cisco® Aironet® 2700 Series of Wi-Fi access points (APs) delivers industry-leading 802.11ac performance at a price point ideal for plugging capacity and coverage gaps in dense indoor environments. The Aironet 2700 Series extends 802.11ac speed and features to the current generation of smartphones, tablets, and high-performance laptops with the 802.11ac Wi-Fi radios.
The Aironet 2700 series supports 802.11ac “Wave 1” In its first implementation, providing a theoretical connection rate of up to 1.3 Gbps. The boost helps exceed the performance and bandwidth expectations of today’s mobile worker, who usually uses multiple Wi-Fi devices instead of just one. As such, users are adding proportionally larger traffic loads to the wireless LAN, which has outpaced Ethernet as the default enterprise access network.
High Density Experience (HD Experience)
Building on the Cisco Aironet heritage of RF excellence, the 2700 Series APs run on a purpose-built, innovative chipset with a best-in- class RF architecture. This chipset provides a high-density experience for enterprise networks designed for mission-critical, high-performance applications. The 2700 is a component of a Cisco series of flagship, 802.11ac-enabled APs that delivers a robust mobility experience based on the following product features:
- 802.11ac with 3x4 multiple-input multiple-output (MIMO) technology supporting three spatial streams. This architecture offers a sustained 1.3-Gbps rates over a greater range for more capacity and reliability than competing APs.
- Cross-AP Noise Reduction, a Cisco innovation that enables APs to intelligently collaborate in real time about RF conditions so that users connect with optimized signal quality and performance.
- Optimized AP Roaming to ensure that client devices associate with the AP in their coverage range that offers the fastest data rate available.
- Cisco ClientLink 3.0 technology to improve downlink performance to all mobile devices, including one-, two-, and three-spatial-stream devices on 802.11ac. At the same time, the technology improves battery life on mobile devices.
- Cisco CleanAir technology enhanced with 80MHz channel support. CleanAir delivers proactive, high-speed spectrum intelligence across 20-, 40-, and 80-MHz-wide channels to combat performance problems due to wireless interference.
- MIMO equalization capabilities, which optimize uplink performance and reliability by reducing the impact of signal fade.
The Cisco Aironet 2700 Series sustains higher-speed connections farther from the AP than competing solutions when it entered the market. The result is up to three times greater availability of 1.3-Gbps rates in the Cisco environment for optimum mobile device performance and user experiences.
Cisco also offers the industry’s broadest selection of Wi-Fi antennas, delivering optimal coverage to different deployment scenarios.
