When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
The unit has been reset to the factory default settings. See console log below.
COMPONENTS INCLUDED IN THIS sale:• (1) - CISCO 3750-X WS-C3750X-48P-S POE+ 48-PORT MANAGED GIGABIT SWITCH
• (1) - CISCO C3KX-NM-10G EXPANSION MODULE
• (2) - POWER CORD
REPLACEMENT or MONEY BACK GUARANTEE:When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.
ADDITIONAL INFORMATION:Loading />versalk9-mz.152-1.E2_20140314.bin: no such file or directory
Error loading />
Interrupt within 5 seconds to abort boot process.
Loading />File uncompressed and installed, ent
ry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.2(4)E6, R
ELEASE SOFTWARE (fc4)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Thu 05-Apr-18 02:22 by prod_rel_team
Initializing flashfs...
Using driver version 4 for media type 1
Using driver version 4 for media type 2
mifs[6]: 12 files, 1 directories
mifs[6]: Total bytes : 2097152
mifs[6]: Bytes used : 755200
mifs[6]: Bytes available : 1341952
mifs[6]: mifs fsck took 0 seconds.
mifs[6]: Initialization complete.
mifs[7]: 0 files, 1 directories
mifs[7]: Total bytes : 4194304
mifs[7]: Bytes used : 1024
mifs[7]: Bytes available : 4193280
mifs[7]: mifs fsck took 0 seconds.
mifs[7]: Initialization complete.
mifs[8]: 5 files, 1 directories
mifs[8]: Total bytes : 524288
mifs[8]: Bytes used : 9216
mifs[8]: Bytes available : 515072
mifs[8]: mifs fsck took 0 seconds.
mifs[8]: Initialization complete.
mifs[9]: 5 files, 1 directories
mifs[9]: Total bytes : 524288
mifs[9]: Bytes used : 9216
mifs[9]: Bytes available : 515072
mifs[9]: mifs fsck took 1 seconds.
mifs[9]: Initialization complete.
mifs[10]: 453 files, 8 directories
mifs[10]: Total bytes : 57671680
mifs[10]: Bytes used : 47497216
mifs[10]: Bytes available : 10174464
mifs[10]: mifs fsck took 0 seconds.
mifs[10]: Initialization complete.
...done Initializing flashfs.
Checking for Bootloader upgrade..
Boot Loader upgrade not required (Stage 2)
FIPS: Flash Key Check : Begin
FIPS: Flash Key Check : End, Not Found, FIPS Mode Not Enabled
POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed
POST: MA BIST : Begin
POST: MA BIST : End, Status Passed
POST: TCAM BIST : Begin
POST: TCAM BIST : End, Status Passed
POST: SF ASIC BIST : Begin
POST: SF ASIC BIST : End, Status Passed
POST: Switch Fabric Memory Tests : Begin
POST: Switch Fabric Memory Tests : End, Status Passed
POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Passed
POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed
extracting front_end/front_end_ucode_info (309 bytes)
Waiting for Stack Master Election...
POST: Inline Power Controller Tests : Begin
POST: Inline Power Controller Tests : End, Status Passed
POST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
POST: PortASIC Macsec Loopback Tests : Begin
POST: PortASIC Macsec Loopback Tests : End, Status Passed
POST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : End, Status Passed
Election Complete
Switch 1 booting as Master
Waiting for Port download...Complete
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C3750X-48P (PowerPC405) processor (revision K0) with 262144K bytes of m
emory.
Processor board ID FDO1718R25D
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
52 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : F8:72:EA:11:B9:80
Motherboard assembly number : 73-12553-08
Motherboard serial number : FDO17181ZPB
Model revision number : K0
Motherboard revision number : B0
Model number : WS-C3750X-48P-S
Daughterboard assembly number : 800-32727-03
Daughterboard serial number : FDO17182509
System serial number : FDO1718R25D
Top Assembly Part Number : 800-31324-07
Top Assembly Revision Number : C0
Version ID : V04
CLEI Code Number : COMJZ00ARD
Hardware Board Revision Number : 0x04
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 54 WS-C3750X-48P 15.2(4)E6 C3750E-UNIVERSALK9-
M
Press RETURN to get started!
*Mar 1 00:00:07.348: Read env variable - LICENSE_BOOT_LEVEL =
*Jan 2 00:00:05.863: Module nam
e = c3750x Next reboot level = ipbase and License = ipbase
*Jan 2 00:01:17.552: %STACKMGR-4-SWITCH_ADDED: Switch 1 has been ADDED to the s
tack
*Jan 2 00:01:20.513: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, cha
nged state to down
*Jan 2 00:01:20.513: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to down
*Jan 2 00:01:22.619: %SMI-5-CLIENT: Smart Install Client feature is enabled. I
t is recommended to disable the Smart Install feature when it is not actively us
ed. To disable feature execute 'no vstack' in configuration mode
*Jan 2 00:01:28.013: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for typ
e vlan
*Jan 2 00:01:36.175: %PLATFORM_ENV-6-FRU_PS_OIR: FRU Power Supply 1 inserted
*Jan 2 00:01:36.175: %PLATFORM_ENV-6-FRU_PS_OIR: FRU Power Supply 2 inserted
*Jan 2 00:01:36.175: %PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not res
ponding
*Jan 2 00:01:56.769: %STACKMGR-5-SWITCH_READY: Switch 1 is READY
*Jan 2 00:01:56.769: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has c
hanged to state DOWN
*Jan 2 00:01:56.769: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 1 has c
hanged to state DOWN
*Jan 2 00:01:57.306: %USB_CONSOLE-6-MEDIA_RJ45: Console media-type is RJ45.
*Jan 2 00:01:57.927: %STACKMGR-5-MASTER_READY: Master Switch 1 is READY
*Jan 2 00:01:59.529: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 15.2(4)E6, R
ELEASE SOFTWARE (fc4)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Thu 05-Apr-18 02:22 by prod_rel_team
*Jan 2 00:02:01.550: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
down
*Jan 2 00:02:02.557: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to down
*Jan 2 00:02:10.518: %PLATFORM-6-FRULINK_INSERTED: FRULink 10G ST module insert
ed in Switch 1.
*Jan 2 00:02:15.576: %PLATFORM_ENV-1-FAN: Faulty fan detected
--- System Configuration Dialog ---
Enable secret warning
----------------------------------
In order to access the device manager, an enable secret is required
If you enter the initial configuration dialog, you will be prompted for the enab
le secret
If you choose not to enter the intial configuration dialog, or if you exit setup
without setting the enable secret,
please set an enable secret using the following CLI in configuration mode-
enable secret 0
----------------------------------
Would you like to enter the initial configuration dialog? [yes/no]: n
Switch> Please Click Here to Visit Our StoreSearchBy31 - 256185 | Loc: G42 | L: Mitchell |T: | PM: Nick | QTY: 0| Plan: 20% - NET of FEES |22.00"x21.00"x5.00"30.00lbs |Start: $0.00 | BIN: $124.99 | |2023-12-04 ||51268
