When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
This unit powers on and its LEDs light up. This unit is in good cosmetic condition and may have minor scratches and blemishes but they do not affect functionality. This unit has been reset to the factory default settings. See console log below. This unit does not come with a power cord.
COMPONENTS INCLUDED IN THIS sale:• (1) - ARISTA 48-PORT NETWORK SWITCH 7050S-64 4-PORT SFP W/RACKMOUNT
• (2) - EMERSON NETWORK POWER PSU DS460S-3
• (4) - FAN
REPLACEMENT or MONEY BACK GUARANTEE:When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.
ADDITIONAL INFORMATION:localhost#show ver
Arista DCS-7050S-64-F
Hardware version: 01.26
Serial number: JPE13380987
System MAC address: 001c.734d.f051
Software image version: 4.12.7.1
Architecture: i386
Internal build version: 4.12.7.1-1692483.EOS4127.1
Internal build ID: aae7a01c-f862-4897-aac7-5b9f890f5f1f
Uptime: 6 minutes
Total memory: 4017108 kB
Free memory: 1811392 kB
Arista Networks Inc...
Aboot 2.0.10-1458058
Press Control-C now to enter Aboot shell
Booting flash:/EOS-4.12.7.1.swi
[ 6.618364] Starting new kernel
Data in /mnt/flash/EOS-4.12.7.1.swi differs from previous boot image on /mnt/fl.
Saving new boot image to /mnt/flash...
Switching rootfs
Welcome to Arista Networks EOS 4.12.7.1
Mounting filesystems: [ OK ]
Starting udev: [ OK ]
Setting hostname localhost: [ OK ]
Entering non-interactive startup
Starting EOS initialization stage 1: [ OK ]
ip6tables: Applying firewall rules: [ OK ]
iptables: Applying firewall rules: [ OK ]
iptables: Loading additional modules: nf_conntrack_tftp [ OK ]
Starting system logger: [ OK ]
Starting NorCal initialization: [ OK ]
Retrigger failed udev events[ OK ]
Starting mcelog daemon
Starting EOS initialization stage 2: [ OK ]
Starting ProcMgr: [ OK ]
Starting Power On Self Test (POST): [ OK ]
Starting sshd: [ OK ]
Starting crond: [ OK ]
Completing EOS initialization (press ESC to skip): [ OK ]
Model: DCS-7050S-64
Serial Number: JPE13380987
System RAM: 4017108 kB
Flash Memory size: 1.5G
No startup-config was found.
The device is in Zero Touch Provisioning mode and is attempting to
download the startup-config from a remote system. The device will not
be fully functional until either a valid startup-config is downloaded
from a remote system or Zero Touch Provisioning is cancelled.
To cancel Zero Touch Provisioning, login as admin and type
\'zerotouch cancel\' at the CLI. Alternatively, to disable Zero Touch
Provisioning permanently, type \'zerotouch disable\' at the CLI.
Note: The device will reload when these commands are issued.
localhost login: Feb 16 18:48:11 localhost ZeroTouch: %ZTP-5-INIT: No startup-cg
No startup-config was found.
The device is in Zero Touch Provisioning mode and is attempting to
download the startup-config from a remote system. The device will not
be fully functional until either a valid startup-config is downloaded
from a remote system or Zero Touch Provisioning is cancelled.
To cancel Zero Touch Provisioning, login as admin and type
\'zerotouch cancel\' at the CLI. Alternatively, to disable Zero Touch
Provisioning permanently, type \'zerotouch disable\' at the CLI.
Note: The device will reload when these commands are issued.
localhost login: Feb 16 18:49:47 localhost ZeroTouch: %ZTP-5-DHCP_QUERY_FAIL: Fe
Feb 16 18:49:47 localhost ZeroTouch: %ZTP-5-RETRY: Retrying Zero Touch Provisio)
Feb 16 18:49:47 localhost ZeroTouch: %ZTP-5-INTERFACE_SPEED: Setting interface ]
No startup-config was found.
The device is in Zero Touch Provisioning mode and is attempting to
download the startup-config from a remote system. The device will not
be fully functional until either a valid startup-config is downloaded
from a remote system or Zero Touch Provisioning is cancelled.
To cancel Zero Touch Provisioning, login as admin and type
\'zerotouch cancel\' at the CLI. Alternatively, to disable Zero Touch
Provisioning permanently, type \'zerotouch disable\' at the CLI.
Note: The device will reload when these commands are issued. Please Click Here to Visit Our StoreSearchBy31 - 258386 | Loc: G55 | L: Marcel Hoang |T: | PM: Nick | QTY: 0| Plan: 20% - NET of FEES |19.00\"x21.00\"x5.00\"30.00lbs |Start: $0.00 | BIN: $149.99 | |2024-02-16 ||51268
