When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Avaya MM716 Analog HV12 Analog Media Module 700386204 Ser 3 The Avaya MM716 Analog Media Module (Part Number 700386204, Series 3) is a hardware expansion board designed to seamlessly bridge analog endpoints and trunks into modern IP telephony networks.Core Specifications
• Port Capacity: Provides 24 analog ports that support standard single-line telephones, modems, and fax machines.
• Trunk Configuration: All 24 ports can be individually configured as Direct Inward Dialing (DID) trunks using either wink-start or immediate-start signaling.
• Connector Type: Employs a single 25-pair RJ21X Amphenol connector on the front panel. This is typically routed via an Amphenol cable to a breakout box or a traditional punch-down block.
• Caller ID: Supports standard Type 1 Caller ID functionality.
• Message Waiting: Offers LED-based message waiting indication (MWI) for connected analog stations.
Power & Loop Length Limits
The module integrates internal ring voltage generation capable of supporting international frequencies and cadences, adhering to the following line limits:
• Simultaneous Ringing: Capable of ringing up to all 24 ports simultaneously.
• Ringer Equivalence Number (REN): Supports a total load of up to 3 REN per port.
• Maximum Distance (Loop Lengths): Maximum loop reach depends heavily on the wire gauge used:
• 22 AWG (0.65 mm): Up to 20,000 feet (6,096 meters).
• 24 AWG (0.50 mm): Up to 16,000 feet (4,877 meters).
• 26 AWG (0.40 mm): Up to 10,000 feet (3,048 meters).
• Note: If the ringer load drops to 0.1 REN or less, it can reach up to 20,000 feet across all three wire gauges.
Compatibility & Requirements
• Gateway Compatibility: Fits directly into the media module slots of the Avaya G350, G450, and G700 Branch Gateways.
• Software Requirements: Minimum requirement of Avaya Aura Communication Manager Release 3.1 or higher.
• Firmware Requirements: Requires Branch Gateway firmware version 25.0.0 or higher to properly recognize and initialize the board.
