Used Creality Ender 3V3 KE/Ender 3V3 SE/CR-M4/T500/K1/K1 Max 3D Printer US Lot For Sale


Used Creality Ender 3V3 KE/Ender 3V3 SE/CR-M4/T500/K1/K1 Max 3D Printer US Lot
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

Used Creality Ender 3V3 KE/Ender 3V3 SE/CR-M4/T500/K1/K1 Max 3D Printer US Lot:
$129.00

Used Creality Ender 3 V2/Ender 3 S1 Pro/Ender 5 S1/K1 Max 3D Printer US Hot refurbished 3D printers are machines that are returned to an online store within 30 days of their initial purchase. These machines have been professionally inspected and are problem-free. This adds more reliability and stability to the machine. In addition, refurbished machines are 15-50% cheaper than brand new machines. These machines are repaired by professionals using genuine parts. All refurbished machines go through an assembly and test printingprocess. These items may show small marks from previous use, such as scratches, but they do not affect their normal function.


We also offer pre-sales and post-sales support. If you have questions about your current printer, or just need help deciding which one to purchase, please don't hesitate to ask questions and we'll get back to you as soon as possible.


K1 Max(Printing size 300*300*300mm)Features:
【600mm/s 20000mm/s ² High Speed Printing & High Precision Quality】Official Creality K1 MAX 3D printer has 600mm/s printing speed, Acceleration up to 20000mm/s ², accelerating from 0 to 600mm/s only takes 0.03 seconds, delivering full speed in 90% of the printing time,enable you save more than 80% of printing time. The G-sensor, The enhanced Z-axis and agile Core XY system, The integration of a die-cast aluminum alloy structure ensures stable printing even at high speeds.【Large Build Volume & Hands-Free Auto Leveling】The Official Creality K1 Max 3D Printer boasts an impressive printing size of which can print more models at one time, and is more suitable for large-scale prototype design or design verification, which greatly improves printing efficiency. Creality K1 Max 3d printer, its strain sensors in the heatbed for more precise auto leveling without any operation or attention.【AI Lidar & AI Camera】The Official Creality K1 Max 3D Printer 1μm resolution LiDAR will scan the first layer on its own. It will pause printing and tell you immediately if something goes wrong. And K1 Max uses an AI camera to watch over spaghetti failure, foreign objects, debris, etc. It will alter you when an error occurs. It also supports real-time monitoring and creates time-lapses for sharing. The strain sensors in the heatbed generate an accurate leveling mesh for auto compensation.【Ceramic Hotend & Advanced Dual Cooling】Adopted the new 360-degree ceramic surround heating method, the Official Creality K1 Max 3D Printer hotend can be heated to 200 ℃ in just 40 seconds, quickly melting the filament. Official Creality K1 Max 3D printer is equipped with a dual air cooling system. Both the printing nozzle and the build chamber are equipped with heat dissipation fans, which can quickly cool the model, effectively avoiding situations such as wire drawing and warping.【Out of The Box & Beginner & Expert Friendly】Completely assembled, just a few simple steps to start printing. This Official Creality K1 Max 3D printer has functions such as hands-free auto leveling, self-test with one Tap, and automatic solve ringing with G-sensor. Without the need for complex settings, beginners can also quickly operate and start printing, Beginner & Expert Friendly.
Specification:
Printing Technology: FDM
Build Volume: 300*300*300mm
Product Dimensions: 435*462*526mm
Package Dimensions: 508*508*608mm
Net Weight: 18kg
Gross Weight: 23kg
Printing Speed: ≤600mm/s
Acceleration: ≤20000mm/s²
Printing Accuracy: 100±0.1mm
Layer Height: 0.1-0.35mm
Extruder: Dual-gear direct drive extruder
Filament Diameter: 1.75mm
Nozzle Diameter: 0.4mm(compatible with 0.6/0.8mm)
Nozzle Temperature: ≤300℃
Heatbed Temperature: ≤100℃
Build Surface: Flexible build plate
Leveling Mode: Hands-free auto leveling
File Transfer: USB drive, Ethernet, WiFi
Display Screen: 4.3" color touch screen
AI Camera: Yes
AI LiDAR: Yes
Power Loss Recovery: Yes
Filament Runout Sensor: Yes
Input Shaping: Yes
Air Purifier: Yes
Lighting Kit: Yes
Sleep Mode: Yes
Rated Voltage: 100-240V~, 50/60Hz
Rated Power: 1000W
Supported Filaments: PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF, PA-CF, PET-CF
Printable File Format: G-Code
Slicing Software: Creality Print; compatible with Cura, Simplify3D, PrusaSlicer
File Formats for Slicing: STL, OBJ, AMF
UI Languages: English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Japanese, Chinese
K1(Printing size 220*220*250mm)Features:
  • Rapid Printing: The Creality K1 3D printer is built for speed, reaching up to 600mm/s and 20000mm/s² Acceleration. Reaching 200℃ in just 40 seconds. That's 12 times faster than regular FDM 3D printers. Perfect for professionals and beginners.
  • Effortless Auto-Leveling: Achieve perfect prints effortlessly with one-tap auto-leveling and dual cooling systems. The Creality K1's innovative design, including a large drum fan and simulated wind tunnel, ensures accurate leveling. An 18W turbofan allows unsupported printing of complex structures.
  • Solid Unibody Frame: The G-sensor and die-cast frame parts of the Creality K1 eliminate ringing, ensuring steady printing. CoreXY structure, along with an auxiliary cooling fan, adds stability and vibration resistance even at high speeds. Z-axis control reduces layer lines for smoother 0.1mm detailed prints.
  • Connected and Carefree Control: Creality K1 can print via USB drive or WiFi. Creality K1 can be controlled or monitored* remotely from Creality Print or Creality Cloud APP/WEB. Also allowed when many K1 printers are online. Once the printing is complete or abnormal, a notice will be sent to your phone or PC. No more close watch.
Specification:
Product Name:K1 Speedy 3D Printer
Printing Technology: FDM
Build Volume: 220*220*250mm
Product Dimensions: 355*355*480mm
Package Dimensions: 415*415*550mm
Net Weight: 12.5kg
Gross Weight: 16kg
Printing Speed: ≤600mm/s
Acceleration: ≤20000mm/s²
Printing Accuracy: 100±0.1mm
Layer Height: 0.1-0.35mm
Extruder: Dual-gear direct drive extruder
Filament Diameter: 1.75mm
Nozzle Diameter: 0.4mm(compatible with 0.6/0.8mm)
Nozzle Temperature: ≤300℃
Heatbed Temperature: ≤100℃
Build Surface: Flexible build plate
Leveling Mode: Hands-free auto leveling
File Transfer: USB drive, WiFi
Display Screen: 4.3" color touch screen
AI Camera: Optional
AI LiDAR: Optional
Power Loss Recovery: Yes
Filament Runout Sensor: Yes
Input Shaping: Yes
Lighting Kit: Yes
Sleep Mode: Yes
Rated Voltage: 100-120V~, 200-240V~, 50/60Hz
Rated Power: 350W
Supported Filaments: ABS, PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF, PA-CF, PET-CF
Printable File Format: G-Code
Slicing Software: Creality Print; compatible with Cura, Simplify3D, PrusaSlicer
File Formats for Slicing: STL, OBJ, AMF
UI Languages: English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Japanese, Chinese
Ender 5 S1(Printing size 220X220X280mm)Features:
🔝 Stable Frame Underpins Quality:An all-metal cube frame goes with the classic Cartesian structure. The stability is enhanced by thick linear shafts, extra gussets, two cantilevers, and silicone bed mounts. It ensures a 100% success rate for 1,000h printing at 250mm/s.
🔝 Clog-free Direct Extrusion at 300℃: The “Sprite” dual-gear direct extruder delivers a strong 80N extrusion force. The hotend features a titanium heatbreak blocking heat creep, a corrugated heatsink for rapid cooling, and a 50mm³ large melting chamber to fully melt the filament. It can print PLA, TPU, PETG, ABS, and more, clog-freely for 1,000 hours.
🔝 Clog-free Direct Extrusion at 300℃: The “Sprite” dual-gear direct extruder delivers a strong 80N extrusion force. The hotend features a titanium heatbreak blocking heat creep, a corrugated heatsink for rapid cooling, and a 50mm³ large melting chamber to fully melt the filament. It can print PLA, TPU, PETG, ABS, and more, clog-freely for 1,000 hours.
🔝 Auto-leveling and Smart Sensors: The CR Touch probe realizes fully-automatic precise 25-point bed leveling. The Z-offset can be adjusted at 0.05 accuracy with touch control. It also has a filament runout sensor and power loss recovery to factor in accidental moments. It is a tool to always count on.
🔝 BendablePC Surface and Greater Ease: ThePC spring steel sticks to the first layers firmly, enables print removal with a slight bend, and its magnetic base with 2 notches allow quick snap-on. Also easy to use with 4.3in color touch screen, USB-C cable printing, modular design, aviation connector, and tidy wire harness sleeve.

Specification:
Model:Ender 5 S1 3D Printer
Build Volume: 220*220*280mm
Product Dimensions: 425x460x570mm
Net Weight: 12.1kg
Extruder Type: "Sprite" dual-gear direct drive extruder
Extruder Material: All metal
Leveling Mode: CR Touch auto-leveling
Mainboard: 32-bit silent mainboard
Display Screen: 4.3 inch color touchscreen
Max. Printing Speed: ≤250mm/s
Typical Printing Speed: ≤120mm/s
Acceleration: 2000mm/s²
Nozzle Type: Brass nozzlex1
Nozzle Diameter: Standard 0.4mm
Printing Accuracy: ±0.1mm
Layer Height: 0.05-0.35mm
Filament Diameter: 1.75mm
Nozzle Temperature: ≤300°C
Heatbed Temperature: ≤110°C
Build Surface: PC spring steel sheet
Power Loss Recovery: Yes
Filament Runout Sensor: Yes
Rated Voltage: 100-120V~, 200-240V~, 50/60Hz
Rated Power: 350W
File Transfer: TF card, USB Type-C cable
File Formats: STL, OBJ, AMF
Supported Filaments: PLA, PETG, ABS, TPU, PC, ASA, HIPS
Slicing Software: Creality Slicer, Creality Print, Cura, Repetier-Host, Simplify3D
UI Languages: "English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Chinese"
Package Weight: 14.7kg/2.2lb
Package Dimensions: 528x474x340mm/20.7x18.6x13.3inEnder 3V3 SE(Printing size 220X220X250mm)【CR Touch Auto Leveling & Strain Sensor】Ender 3 V3 SE features a CR Touch sensor for auto leveling and a strain sensor for auto z-offset. Just lay back and enjoy the print success, there is no need to participate manually throughout the process, making leveling much easier.【Ensure Smooth Feeding】Ender-3 V3 SE 3d printers comes with the new upgraded "Sprite" Full Metal Dual-gear Direct Extruder, more powerful extruder pushing force and lightweight, the extruder realizes smooth feeding and discharging of flaments without slipping. Works extremely well in printing flaments like PLA, TPU, PETG, etc.【250mm/s High-speed Printing】Creality Ender 3 V3 SE 3d printer supports a maximum printing speed of 250mm/s, 2500mm/s² acceleration. The speed has been greatly improved while maintaining the printing quality, saving 73% of the time compared with other printers.【Stable Dual Z-axis & Y-axis Linear Shafts】High-precision dual Z-axis lead screws reduce Z wobbling effectively, avoid printing deviation in single-axis printing. The Y-axis features two 8mm linear shafts made of strong and wear-proof steel, ensuring printing stability and higher printing accuracy over a long-lasting time.【Quick Assembly & Easy to Use】Preassembly has solved those hassles and worries of parts assembly, It only takes 3 steps to complete the assemble the ender 3 v3 se 3d printer, it only takes 20 minutes from the unpacking to the first printing.【Auto Filament Loading & Unloading】Ender 3 V3 SE supports automatic loading and unloading filament function. Tap "Extrude", and the filament will flow out of the nozzle smoothly. Tap "Retract", and the filament will exit quickly. So, it is effortless to replace the filament.【Sleek and Compact Design】Creality Ender-3 V3 SE adopts a more compact and stylish design, smooth T-shaped profiles and low-key tensioners for a sleek look. It takes up less space but brings an ample build volume.Specification:
Printing Technology : FDM

Product Dimensions : 349*364*490mm

Package Dimensions :575*390*235mm

Build Volume :220*220*250mm

Net Weight : 7.12kg

Gross Weight :9.14kg

Typical Printing Speed :180mm/s

Max. Printing Speed :250mm/s (Data from printing test with CR-PLA.)

Acceleration : 2500mm/s2

Layer Height :0.1-0.35mm

Printing Accuracy :+0.1mm

Leveling Mode :Auto Leveling

Nozzle Temperature : <260°C

Heatbed Temperature :<100°C

Mainboard Type :32-bit Silent Mainboard

Power Loss Recovery :Yes

Build Surface :PC Spring Steel

Display Screen :3.2" Color Knob Screen

Nozzle Diameter :0.4 mm

Extruder Type : "Sprite" Direct Extruder

Extruder Count :1

Rated Power :350W

Supported Filaments :PLA, PETG,TPU(95A)

File Transfer :SD Card

File Formats for Slicing :STL,OBJ,3MF,AMF

Supported PC OS :Windows, Mac OS, Linux

Slicing Software :Creality Print,Cura 5.0 or Newer Version, Simplify3D

Ul Languages :English, French, Portuguese, Turkish, German, Spanish, ltalian, Russian, Japanese, Chinese
Ender 3V3 KE(Printing size 220X220X240mm)【Smart Algorithms, Better Print Quality】Ender 3 V3 KE utilizes smart algorithms to reduce vibrations, minimizing ringing and ghosting, while optimizing feeding flow to eliminate blobs and oozing for superior print quality.【Smart UI & Auto Calibration】Experience a user-friendly touch interface and auto calibration that simplifies Z offset adjustments, leveling, and more with just a tap. Gain real-time model previews and dynamic printing parameter visuals for complete control.【Smart Control and Monitoring On-the-Go】Effortless Remote Management and Monitoring: With LAN and cloud printing, you can effortlessly control and monitor your 3D printer from a PC (Creality Print) or phone (Creality Cloud APP) via WiFi. Maximize efficiency by overseeing multiple printers as a print farm.【Exceptional Printing Speed】Max Print Speed: 500mm/s, Max Acceleration: 8000mm/s².【X-axis Linear Rail, Ultra-smooth Motion】The precision linear rail ensures every movement is accurate, stable, and free of friction (with a remarkable 0.04 friction coefficient*), while the durable steel construction guarantees long-lasting performance, regardless of extensive use.【Powerful Hotend for High-Speed Printing】60W ceramic heater for rapid filament fully melting, a bi-metal (copper + titanium alloys) heatbreak to prevent thermal creep, and a copper nozzle enabling precise 300°C printing.【Double Fans for Rapid Model Cooling】With a model cooling fan on each side of the printhead, the Creality Ender 3 V3 KE 3D Printer ensures rapid and uniform cooling of the printed section, keeping your prints in perfect shape.【More Filaments to Print With】The Ender3 V3 KE can handle Hyper PLA, PETG, ABS, TPU (95A), and ASA filaments. Whether you need to print daily items, parts, or products, simply choose the right filament. Achieve faster and better printing with Creality Hyper PLA.【Start Printing Effortlessly】With quick assembly, self-test calibration, and automatic filament loading, the Creality Ender 3 V3 KE 3D Printer, will get you up and running in no time.【Enhance Your Printing Experience】Stay updated with OTA firmware updates, slicing presets in Creality Print, get print alerts on Phone/PC, free models on Creality Cloud, dual linear shafts on Y-axis, dual Z-axis lead screws.
Creality Ender-3 V3 KE 3D PrinterPrinting Technology: FDMBuild Volume: 220*220*240mmProduct Dimensions: 433*366*490mmPackage Dimensions: 502*409*280mmNet Weight: 7.8kgGross Weight: 9.9kgTypical Printing Speed: 300mm/sMax. Printing Speed: 500mm/s (Test with Hyper PLA)Max. Acceleration: 8000mm/s²Printing Accuracy:±0.1mmLayer Height:0.1-0.35mmFilament Diameter: 1.75mmNozzle Diameter: 0.4mm (default)Nozzle Temperature: ≤300℃Heatbed Temperature: ≤100℃Build Surface: PEI flexible build plateFile Transfer: USB drive, LAN, Creality Cloud APPExtruder: Upgraded "Sprite" direct drive extrusionLeveling Mode: Hands-free auto levelingDisplay Screen: 4.3" color touch screenMainboard: 32-bit silent mainboardPrintable File Format: G-codePower Loss Recovery: YesFilament Runout Sensor : YesVibration Compensation Sensor :OptionalCreality AI Camera: OptionalRated Voltage: 350WRated Power: 100-120V~, 200-240V~, 50/60HzSlicing Software: Creality Print, Cura, Simplify3DFormats for Slicing: STL, OBJ, 3MF, AMF

Supported Filaments: PLA, PETG, ABS, TPU(95A), ASA

CR-10 SE(Printing size 220X220X265mm)

  • 【Ideal First Layer with Auto Leveling】Both the leveling and Z offset of Cr-10 SE are fully automated, it delivers a neat, smooth and uniform first layer without any manual calibration.

  • 【Precision Linear Rails at X & Y-Axis】Precise, frictionless, and made of durable steel, the linear rails with ball bearings bring lasting accuracy and steadiness to the X and Y-axis.

  • 【Precision Linear Rails at X & Y-Axis】Precise, frictionless, and made of durable steel, the linear rails with ball bearings bring lasting accuracy and steadiness to the X and Y-axis.

  • 【Upgraded "Sprite" Direct Extrusion】A 60W ceramic heater encircling the hotend and a bi-metal (copper+titaniuam alloys) heatbreak, Cr-10 SE make you enjoy smooth feeding even for high flow.

  • 【Effective Model Cooling Fan】Creality CR-10 SE features a 12000rpm fan, channels a strong wind to cool the freshly printed model section instantly, thus delivering much better bridges and overhangs.

  • 【Algorithms for Refined Print Quality】With input shaping, the printer's vibrations are mitigated for minimal ringing or ghosting, with motion advance, the feeding flow is optimized for fewer blobs and oozes.

Creality CR-10 SE:

  • Hands-free Auto Leveling

  • Linear Rails at X & Y-Axis

  • Dedicated Model Cooling Fan

  • 600mm/s High-speed Printing

  • Input Shaping

  • Hotend with 60W Ceramic Heater

  • Compatible with Diverse Filaments

  • Rich DIY Accessories

Hands-free Leveling to Get Ideal First Layer

  • CR-10 SE uses both a CR Touch and a strain sensor to do leveling and Z offset automatically the first time it is powered on. It delivers an excellent first layer without you lifting a finger.

Linear Rails, Precise and Durable

  • The precise linear rails on the X and Y-axis have carriage slides containing ball bearings, making each move accurate, steady, and frictionless (0.04 friction coefficient*). Built out of stiff bearing steel, they will stay as new even after long-time use.

Effective Model Cooling Fan

  • A 12000rpm fan sends a strong wind via a U-shaped air duct to cool the freshly printed model section from three sides. It improves the bridges and overhangs significantly and makes the details more vivid.

Super Fast to Complete Print Tasks

  • Max Printing Speed: 600mm/s*; Max acceleration: 8000mm/s²* CR-10 SE prints faster and better with Creality Hyper PLA Filament.

Reliable Direct Drive Extrusion

  • CR-10 SE features a "Sprite" direct drive extruder with two gears (1:3.5 gear ratio) that exerts a strong extrusion force of 65N*. The feeding and retraction are exact and uniform, even when it comes to flexible filaments.

Hotend for Clog-free Feeding

  • 60W ceramic heater encircling the hotend, getting the filament fully melted at a 32mm³/s flow*; Bi-metal (copper+titanium alloy) heatbreak, great to prevent thermal creep; Hardened steel nozzle, wear-resistant and enabling 300°C* printing.

Speedy Creality OS and Powerful CPU

  • Creality OS offers a responsive UI, and can sync data and commands with computer, phone, and cloud in real-time. It runs fluently based on a snappy 1.2GHz dual-core CPU and a large 8G ROM.

Smart Connection for Shared Control

  • Once online, CR-10 SE can be monitored from your phone (Creality Cloud APP) and PC. Creality Cloud also includes free models and a slicer, and can send sliced files to print directly.

Make the Most with Creality Print

  • Our newest Creality Print, a self-developed slicer, has added many great functions such as overhang optimization, variable line width, arc fitting, and LAN printing. Now, your printer can realize its full potential in both speed and print quality.

Ender 3(Printing size 220X220X250mm)Key Features: One-piece structure, Super printing size 220*220*250mm.
Safety protected Power supply, reach 110℃ for hotbed in about 5 minutes.
The resume printing function can resume prints even after a power outage or lapse occurs.Removable Build Plate to replace reprinting tape and glue, solve warping problem.V1.1.4 Standard Version motherboard comes with thermal runaway protectionNote:the board is only the Standard Version, Not-SilentEnder 3 Pro (Printing size 220X220X250mm)Compared to Ender 3,Ender 3 Pro has been upgraded with a Completely removable and flexible magnetic bed and Brand Meanwell power supply.Ender 3 V2(Printing size 220X220X250mm)Exquisite Appearance Design:Classic appearance in integrated all-metal body inherited from its predecessor Ender-3, firm and stable. Integrated structure design, with integrated structure and modular design, the power supply is concealed in the machine, making it much safer.
Ender 3 V2 Neo(Printing size 220X220X250mm)

Configure the CREALITY CR TOUCH.
Enhanced Accuracy with CR Touch. 16-point automatic print height's compensation, ensuring the leveling accuracy.

PC Spring Steel Magnetic Build Plate
It's no longer a glass bed. The PC Spring Steel Magnetic build plate has good adhesion, and enables a slight bend to remove the print.

4.3'' Color Knob Screen
Model Preview with New UI. The preview function makes model selection visible, allowing for progress' monitoring.

Full-metal Bowden extruder is durable.
Filaments' loading is easy with a rotary knob. More durable

Ender 3 MaxProduct Parameters:Molding Tech: FDM 3d printerMotherboard: 32bit motherboardPrint size: 300x300x340mmMachine size: 513x563x590mmMachine weight: 9.5kgPrint precision: ±0.2mmPrint speed: 30-60mm/s (recommended), ≤180mm/sLayer thickness: 0.1-0.4mmNominal voltage: 100V-240V AC50/60HZ DC24VNominal power: 350W

Ender-3 S1
Features:

1.【"Sprite" Direct Dual-gear Extruder】: The "Sprite" is lighter and features less inertia and more precise positioning, supports PLA/TPU/PETG/ABS print filaments.

2.【CR Touch Automatic Bed Leveling】: 16-point automatic bed leveling technology saves you the trouble of manual leveling and makes leveling simple and easy.

3.【High-precision Dual Z-axis】: With a Z-axis dual-screw+Z-axis dual-motor design, Ender-3 S1 works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality.

4.【PC Spring Steel Printing Platform】: The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, the model can be sticked to the platform or take off more easier.

5.【Power Loss Recovery and Filament Sensor】: Ender-3 S1 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents.

6.【Low-noise Design】: The brand-new 32-bit silent mainboard runs at low decibel levels, greatly reducing noise to let you enjoy your printing.

7.【Quick Assembling】: 96% of the printer body is pre-installed, making assembling extremely convenient with only 6 steps and the maintenance of the printer simple and easy.

Specification:

"Sprite" Direct Dual-gear Extruder

CR Touch Automatic Bed Leveling

High-precision Dual Z-axis

PC Spring Steel Printing Platform

Power Loss Recovery and Filament Sensor

4.3-inch LCD Screen

Strong Expandability

Low-noise Design

Quick Assembling

Modeling Technology : FDM

Supported Filaments : PLA/TPU/PETG/ABS

Nozzle Diameter : 0.4mm

Machine Net Weight : 9.1kg

Type of Extruder: “Sprite" Direct Extruder

Resume Printing: supported

Mainboard : 32-bit silent mainboard

Supported File Format : STL/OBJ/AMF

Build Size : 220*220*270mm

Printing Speed: 150mm/s at the maximum

Filament Diameter : 1.75mm

Extruder Gear ratio: 1:03.5

Automatic Bed Leveling: CR Touch

Rated Power: 350 W

Slicing Software : Creality style="color: #000000; text-align: left; box-sizing: border-box; outline-width: 0px; margin: 0px; line-height: inherit; padding: 0px; background-color: #ffffff;">Printer Size: 487*453*622mm

Printing Layer Thickness :0.05-0.35mm

Number of Nozzles:1

Package Gross Weight:11.2kg

Filament Sensor:supported

Rated Voltage : 115/230v 50/60Hz 4.5/2.5A

Software Language: Chinese/English

Package Size: 540*510*260mm

Printing Precision ±0.1mm

Printing Platform:PC spring steel sheet

Maximum Heatbed Temperature :100°C

Screen:Knob color screen

Printing Method :Type-C USB/SD card

Maximum Nozzle Temperature :260°C

Ender 3 S1 Pro

The Ender 3 S1 Pro is a new and improved version of the very successful Ender 3. Equipped with a newly developed direct dual-gear extruder, automatic bed leveling, 32-bit silent mainboard, among other things, the S1-Pro is a very affordable printer with everything you could wish for at this price point.

Sprite Full-Metal Direct Drive Extruder with dual gear

Ender 3 s1 and Ender 3 S1 Pro use direct-drive extruders. The distance is shorter in a direct drive and the retraction too. Ender-3 S1 Pro upgrade to full-metal dual-gear direct extruder with an extrusion force of 80N ensures smooth feeding when printing with different filaments. especially the flexible TPU.

Up to 300℃ high-temp printing support multiple filaments.

It's compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, providing more possibilities for creation.

Spring Steel PEI Magnetic Build Plate

It can handle high temperatures a lot better than the one used in Ender 3 S1. You can easly remove it if you want since it gets attached to magnetics well. It is compatible with ASA, TPU, PLA, Wood, PETG, PAHT, SILK as well as other types of filaments. It removes all the small issues you have while printing. It trully takes no effort to take out the print -when printing is over, you simply bend the base and the model detaches itself from it.

Features of Ender-3 S1 Pro 3D PrinterModeling Technology: FDM(Fused Deposition Modeling)Build Volume: 220 x 220 x 270 mmMachine Dimension: 490 x 455 x 625 mmNet Weight: 8.6 kgPrinting Speed: 150mm/s at the maximumPrinting Precision: ±0.1 mmLayer Height: 0.1-0.4 mmFilament Diameter: 1.75 mmNozzle Temperature: Up to 300°CHeat Bed Temperature: Up to 110°CBuild Surface: spring steel PEIExtrusion Force: 80 NLeveling Mode: CR Touch Automatic LevelingDisplay: 4.3-inch color touch screenMotherboard: 32-bit silent motherboardRated Voltage: 100-120V, 220-240V, 50/60 HzData Transmission Method: Type-C USB/ SD card3D File Format: .stl/.obj / .gcode(after slicing)Supported Filament: PLA, ABS, PVA, Wood, TPU90-95, PETG, PASupported Language: Chinese, English, German, Spanish, French, Italian, Portuguese, Russian, and TurkishEnder 3 S1 Plus

Modeling Technology: FDM(Fused Deposition Modeling)

Build Volume: 300*300*300mm

Machine Dimension: 557*535*655mm

Package Dimension: 625*590*230mm

Net Weight: 10.25kg

Gross Weight: 13.4kg

Printing Speed: maximum 100 mm/s

Printing Precision: 100mm±0.2mm

Layer Height: 0.1-0.4 mm

Filament Diameter: 1.75 mm

Nozzle Temperature: up to 260°C

Heat Bed Temperature: Up to 100°C

Build Surface: Spring steel PC magnetic build plate

Extrusion Force: 80 N

Leveling Mode: Auto-leveling with CR-Touch

Display: 4.3-inch color touch screen

Motherboard: 32-bit silent motherboard

Rated Voltage: 100-120V, 220-240V, 50/60 Hz

Data Transmission Method: Type-C USB/ SD card

3D File Format: STL/OBJ/AMF

Supported Filament: PLA/ABS/TPU/PETG

Supported Language: Chinese, English, Spanish, German, French, Portuguese, Italian,Russian and Turkish

Nozzle Quantity: 1

Nozzle Diameter: 0.4 mm

Extruder: "Sprite" Full-metal Dual-gear Direct Extruder

Resume Printing: Yes

Filament Sensor: Yes

Rated Power: 350W/24V

Slicing Software: Creality style="color: #000000; background-color: #ffffff; margin: 0pt 0pt 0.0001pt; text-align: justify;">Features:

The Ender 3 S1 Pro is a new and improved version of the very successful Ender 3. Equipped with a newly developed direct dual-gear extruder, automatic bed leveling, 32-bit silent mainboard, among other things, the S1-Pro is a very affordable printer with everything you could wish for at this price point.

Sprite Full-Metal Direct Drive Extruder with dual gear

Ender 3 s1 and Ender 3 S1 Pro use direct-drive extruders. The distance is shorter in a direct drive and the retraction too. Ender-3 S1 Pro upgrade to full-metal dual-gear direct extruder with an extrusion force of 80N ensures smooth feeding when printing with different filaments. especially the flexible TPU.

Up to 300℃ high-temp printing support multiple filaments.

It's compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, providing more possibilities for creation.

Spring Steel PEI Magnetic Build Plate

It can handle high temperatures a lot better than the one used in Ender 3 S1. You can easly remove it if you want since it gets attached to magnetics well. It is compatible with ASA, TPU, PLA, Wood, PETG, PAHT, SILK as well as other types of filaments. It removes all the small issues you have while printing. It trully takes no effort to take out the print -when printing is over, you simply bend the base and the model detaches itself from it.

Ender 5 (Printing size 220X220X300mm)
Key Point :Faster assembly, Only 5 steps to install
Running quieter and smoothly because of the double Y-axis
Higher precision and accuracy because of the hotbed fixed on Z-axis
Faster printing up to 185mm/s,
36s Faster heating the hotbed up to 50℃ than Ender 3
20℃ higher hotbed heating temp than Ender 3, up to 130℃Long time printing, print 100 hours without error
Power Supply (Landy power supply)Ender 5 Pro
(Printing size 220X220X300mm)Compared to Ender 5,Ender 5 Pro upgradedwithSilent Motherboard & Metal Extruder Frame & Capricorn Bowden Teflon tube

Ender-5 Pro FDM 3D Printer Features

Removable Platform: Creality Ender-5 Pro 3D Printer used its' self-adhesive platform to help it easier to remove the models without other defects.

Creality Ender-5 Pro 3D Printer with upgraded motherboard really produces fewer noises.

And it uses Creality 3D 4-layer PCB with solid filter and capacitor for better ESD protection and more stable performance, TMC ultra-quiet drive 256 subdivision for finer printing.

More smoothly Feed-in: Creality Ender-5 Pro 3D Printer with Imported Capricorn Blue TeflonTube and the metal extruding unit, which helps stable in filament feed in and wear-resisting, hence, we can get a better printing quality.

Creality Ender-5 Pro 3D Printer has a double Y-axis control system with synchronous operation and stable output to avoid vibrations resulting from long-time printing.

Technical Specifications

Ender-5 Pro FDM 3D Printer Properties

Molding Technology: FDM

Print Size: 220x220x300mm

Print Method: Online or TF card offline

File Format: STL/OBJ/AMF

Filament Diameter:1.75mm

Ender-5 Pro FDM 3D Printer Hardware

Machine Size: 552x485x510mm

N.W. of Machine: 11.8kg

Number of Nozzle: 1

Ender-5 Pro FDM 3D Printer Extruder Hardware

Slice thickness: 0.1mm-0.4mm

Printing Precision: ±0.1mm

Nozzle Diameter: Standard 0.4mm, Optional 0.2/0.3mm

Ender-6Creality New cubic Ender-6 3d printer with higher precision and quick printing speed(3X Speed) in Core -XY Structure. In terms of size, the Ender-6's 3d printer build volume of 250 x 250 x 400 mm puts it right between an Ender-5 Pro (220 x 220 x 300 mm) and the CR-10 series, which starts at 300 x 300 x 400 mm. This should suffice for the majority of your daily print jobs.

Elegant Appearance: Ender-6 with a new look integrated all-metal chamber body matched with a transparent acrylic open door and blue corner. Enclosed Performance but Not TOP LID;
Ultra Silent Printing:Ender-6 is custom-built with an ultra-silent Germany-imported TMC motion controller, enabling the printing process won't make any noise. TMC-2208 motherboard always ensures smooth movement in silence;
Large Printing Size:250*250*400mm;
Stable Core -XY Structure:Ender-6 is easier to make the printing more stable and more precise with core-XY mechanical structure and quality print nozzle;
3X Printing Speed:Works quite well to achieve print speed up to150mm/s, delivering the results faster.


CR-30Features:

* Batch Print

* Dual-gear Metal Extruder

* Infinite-Z build volume
* Stable Core-XY structure
* Broadband power supply
* Exclusive slice software
* Rolling conveyor belt
* Filament breakage detector
* Ultra-silent motherboard

Infinite-Z-axis for Endless Printing

Equipped with the rolling conveyor belt, it realizes continuous printing. No worries to print the infinite length model. High productivity, time-saving, and cost-efficient

(Print dimension: 200*170*∞mm)

*A removable extension bracket is available for installing to prevent the model from falling during printing

Dual-gear Metal Extruder

A high-quality dual-gear metal extruder, combined with the 45-degree slanting nozzle turns more than 200 hours of continuous printing into reality.

Stable Core-XY Structure

The stable and sturdy Core-XY precision structure with isosceles right triangle support gives you an extraordinary printing experience

Rolling Conveyor Belt

Made of a wear-resistant material, the conveyor belt features excellent adhesion to the model. The printed model can fall off automatically as the belt rolls to the end, thus free your hand

Strong adhesion| Hassle-free removal | Wear-resistant| Well-balanced conveyance

*Easy to replace the conveyor-belt

Exclusive Slice Software for 3DPrintMill Only

This slicing software CrealityBelt is specially designed for 3DPrintMill. CrealityBelt is truly user-friendly ascribing to its simple operation.

Smart Filament Breakage Detector

Whenever there is a possible accident like filament run-out or filament breakage, the smart sensor forces the machine to suspend printing. Printing will be automatically resumed after the new filament feed-in.

Intelligent power protection device, resume printing, and no fear of power failure.Product Parameters

Molding technology: FDM
Print dimension: 200 * 170 * ∞ mm
Machine dimension: 535 * 656 * 410mm
Package dimension: 685 * 565 * 302mm
N.W.: 16.5kg
G.W.: 20.5kg
Slice software: Crealitybelt
Print accuracy: ± 0.1mm
Nozzle diameter: 0.4mm
Number of nozzles: 1
Hotbed temperature: ≤ 100 ℃
Nozzle temperature: ≤ 240 ℃
Layer thickness: 0.1mm-0.4mm
Rated Power: 350W
Power supply: AC 100-120v / 200-240v, DC 24V
Supported filaments: PLA / TPU / PETG
Diameter of filament: 1.75mm

CR-10 MiniProduct Parameter
Model: CR-10
Printing Size: 300*220*300mm
Molding: FDM
Printing Materials: 1.75mm PLA
Extruder Quantity: 1
Nozzle Diameter: 0.4mm
Printing accuracy: ±0.1mm
Layer thickness: 0.05-0.4mm (adjustable)
Printing Speed: Normal: 40-80mm/s
Nozzle temp: Max 250 degree
Hotbed temperature: PLA: Max 50 degree
Working condition temp: 10-30℃, Humidity:20-50%
Continuous working time lasts up to 200 hours.
Input: 110-240V
Output: 12V/30A
Cura language: English
Interface language: English
File Format: STL, G-Code
Printing Method: TF card(off-line), contact to the PC(online)
Operating System: Linux, Windows, OSX
Operating Software: CURA, Repetier-Host simplify 3D
Software supporting: PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc.
Ender-5 Plus
【Cube Frame 3D Printer】Very solid cube frame. Box Design with Overhead Gantry.
【Ultra Large Printing Format】350X350X400mm. Meet more of your printing requirements. Your idea should not be confined. Achieve better print results and a larger print model at a time.
【Auto Bed Leveling Pre-Installed】With BL Touch as configured. You just plug them in and start printing!it can precisely measure the tilt of the Bed surface, offers the automatic compensation for the Z-axis for unevenness of the platform plate, easy to solve the printing failure caused by the unevenness of the platform and provide reliable operation with all build surfaces.
【Dual Z-Axis】Stable Z-axis Lead screw drive smoothly and steady. The movement of the build plate will be more stable.
CR-10S Pro V2
BL-TOUCH Included:Matrix Automatic Leveling, quality Bill Touch automatic leveling device. And the CR-10 Pro V2 will automatically measure the height of 9 unique points on the heated bed to determine the ideal settings for perfect prints every time.SENSITIVE SENSOR Real-Time Detection,CR-10S Pro V2 has a newly-added innovative material shortage detection switch, Even also highly sensitive to detect transparent materialsSTABLE AND HIGH PRECISION MOTHERBOARD CR-10S Pro V2 adopts V2.4.1 motherboard independently developed stable performance TMC ultra-quiet drive 256 subdivision for finer printingDIGITAL HD TOUCH SCREEN HD touch screen and large viewing angles, printing status, functions and parameter setting are clearly displayed, New Friendly UI, easy to use and learnTEFLON TUBE AND BONDTECH GEAR EXTRUSION Imported high temperature resistant blue Teflontube ensure great printing texture, Bondtech Gear extrusion Structure has two high-density gear and big extrusion force for smooth feeding
Features:Matrix BL Touch automatic levelingV2.4.1 Ultra-Quiet motherboardColorful touch screenResume printing functionSingle-line designDouble gear extrusion mechanismImported authorized Capricorn Teflon tubeBrand Mean Well power supply 500WCR-10 Smart


Eight Key Features

Built-in WIFI function: Remote control printing anytime, anywhere

Low Power Mode: Safe and worry-free save energy and power

Intelligent Auto-leveling: Instant printing after initial auto-leveling

Dual Z Axes+Dual Diagonal Drawbars: Ensure stable and precise printing

4.3-inch Full-view Touch Screen: Intuitive and easy-to-use

Super Car Design: A combination design of aesthetics and technology

Ultra-silent Design: Mute mainboard/Mute fan Low-noise power supply

Modular Structure: 6-steps to assemble 8 minutes to complete

A Bit More Intelligence:

CR-10 Smart 3d printer supports both WIFI & RJ45 wired network connection. With the Creality Cloud APP, you can easily slice 3D models, remote control your printers, and print an object whenever and wherever with your phone.

Ultra-silent Design:

Self-developed 32-bit patented mute mainboard, low-noise power supply, and highly efficient cooling fans ensure a silent 3D printing experience.

Intelligent Auto-leveling:

With the V2.0 auto-leveling system, you can enjoy a hassle-free leveling process and instant printing after the initial auto-leveling is completed.

Screen Protection & Auto-shutdown:

The screen will dim if there's no manual operation in 30 mins to save power. And it's environmentally friendly.

CR-10 Smart supports auto feeding and retreating filament which makes the process easier. The machine will auto shut down after the model is completed to save power and effort.


Product Parameters

Print Tech.: FDM

Print Size: 300*300*400mm

Product Size: 578*522*648mm

Package Size: 660*575*290mm

Product Net Weight: 14KG

Package Gross Weight: 17.3KG

Slicing Software: Creality/Cura

Printing Precision: ±0.1mm

Nozzle Diameter: 0.4mm

Nozzle Qty: 1

Hot Bed Temp: ≤100℃

Nozzle Temp: ≤260℃

Support Languages: 9 Languages
CR-6 SE

Product description

Whychoose CR-6 SE?

1.Only5 mins with 5 modular parts and 8 screws, you can start your first 3D print,simple assembly but more more elaborately. Win-win in fun and performance.

2.ModularizedNozzle kit,equipped with high-efficiency heating device and powerful cooling .Saving more time and effort in nozzle maintenance.

3.Equipped with dual Z-axes and timing belt, the CR-6 SE are morestableduring printing and it can delivering finer results.

4.If the filament run out or broken, the sensor automatically will stops the machine from printing toprotectthe host,.

5.The branded power can provide 24V output, and can adapt to the 100V-240V voltage environment to improve thestability.

6.Moresilencethen usual, We chooses Trinamic Controller which can make the printing results have high-performance

7.You can carry it everywhere you want because of thehandle,the CR-6 SE is 9.5kg light weighted machine. With a handle added ,you can easy to carry it.

8.We take user experience seriously, so weredesignthe hotbed fixator and Wider Y-axis profile.More importantly we built-in tool box for your tiny components

Feature1. Hassle-free and quick leveling: Creality CR-6 SE have intelligent automatic leveling technology, you can get level bed with just click on the screen, and finishes in 45 seconds.Even the beginner of 3D print can get good works.
2. Meanwell 24V/350W Power Supply: CR6 SE equipped with MeanWell power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing. Moreover, the power supply is concealed in the machine, making it much safer and neater.
3.Silent Motherboard with Trinamic Driver: A silent chipset is added to the CR-6 SE. Its latest trinamic driver 2208 helps to ensure that voltage control, fast movement, and printing in silence are a given. Moreover, the extruder fans are much quieter compared with Ender 3 and CR-10.
4. Quick heating and Easy removal: The hotbed use Carborundum glass which can quickly heating up and have strong adhesion in high-temperature.It can easy to remove after cooling also stable for long working.
5. Easy Assemble: In comparison to an Ender 3, CR-6 SE comes almost assembled. You only need to spend 5 minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
CR-10 V3

Product Parameters:

Printing Size :300*300*400mm

Printing accuracy:±0.1mm

Nozzle Diameter:Standard 0.4mm(can be changed to 0.3/0.2/0.5 0.6 0.8 1.00 1.2mm)

Printing Speed:Normal: 80mm/s, Max.: 200mm/s

Materials:1.75mm PLA, ABS, TPU, Copper, Wood, Carbon Fiber, Gradient Color etc.

Software supporting : PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc.

Format : STL, OBJ, G-Code, JPG

Printing Method: SD card(off-line), contact to the PC(on-line)New enhancements:Dual Port Hot Port Cooling Fans: Dual-port cooling fan extruder. Every heat-dissipated and cooling down immediately, reducing plugging and poor-spillage ensure models with high quality.


Titan Direct Drive: The 3d printer equipped with genuine Titan Direct Drive, the torque of the stepper motor is lower. It's more precise to control the feed-in filament, great at printing the soft filament like TPU.


TMC2208 Motherboard: Upgraded ultra-silent motherboard, this Creality 3d printer is more cost-effective and running more stable.


Manual Leveling(Changeable auto-leveling):BL touch(Auto-Leveling Device)can be added by yourself, enjoying more fun of DIY your own Creality 3d printer

Resume Printing Function: Recover from potential print failures before they happen


Filament Sensor(Optimize Structure): This design in Creality 3d printer will save your filaments when a strike occurs.


24V Branded Power Supply: The Creality CR-10 V3 3D printer, solid 350W branded power supply pairs with thermally efficient bed heater. It allows for rapid heating to 100℃.


Dual Z Axes


Branded New UI


Note: The PLA filaments and tool kit are not included.*We currently have two refurbished warehouses in the US, one is in TX, another one is in NY. We would arrange shipment based on the warehouse's stock and shipment address distance, please tell us in advance if you have a preferred warehouse.

Buy Now


Other Related Items:



Related Items:

Used Creality Ender 3 S1 Pro 3D Printer with Direct Drive Extruder Kit CR Touch picture

Used Creality Ender 3 S1 Pro 3D Printer with Direct Drive Extruder Kit CR Touch

$156.99



Used Creality Ender 5 S1 3D Printer with CR Touch Auto Leveling Extruder picture

Used Creality Ender 5 S1 3D Printer with CR Touch Auto Leveling Extruder

$236.99



Used Creality Ender 3 Max Neo 3D Printer CR Touch Leveling Dual Z-Axis picture

Used Creality Ender 3 Max Neo 3D Printer CR Touch Leveling Dual Z-Axis

$180.99