When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Totally new item -Juniper ACX2000-DC Universal Access Router NEW
The ACX2000 router contains sixteen T1/E1 ports, six Gigabit Ethernet ports, and two PoE ports. The ACX2000 router also supports installation of two Gigabit Ethernet SFP transceivers and two 10-Gigabit Ethernet SFP+ transceivers.
The ACX2000 router has one “pseudo” Flexible PIC Concentrator (FPC 0), and four “pseudo” PICs (PIC 0 through 3).
ACX2000 Universal Metro Router Overview
The ACX2000 and ACX2100 Universal Metro Routers are principally designed to provide superior management for rapid provisioning to the access network. The ACX Series routers support rich Gigabit Ethernet and 10-Gigabit Ethernet capabilities for uplink, along with support for legacy interfaces and Gigabit Ethernet interfaces for radio and NodeB connectivity in a compact form factor that is environmentally hardened and passively cooled. Seamless, end-to-end MPLS can be used to address legacy and emerging requirements to provide the foundation for a converged network that utilizes the same mobile backhaul infrastructure for business or residential services.
The ACX Series router is a single-board router with a built-in Routing Engine and one Packet Forwarding Engine. Because there is no switching fabric, the single Packet Forwarding Engine takes care of both ingress and egress packet forwarding:
Routing Engine—Provides Layer 3 routing services and network management.
Packet Forwarding Engine—Performs Layer 2 and Layer 3 packet switching, route lookups, and packet forwarding.
The ACX Series router is powered by Junos OS, supporting extensive L2 and L3 features, IP and MPLS with traffic engineering, rich network management, fault management, service monitoring and Operation, Administration, and Maintenance (OAM) capabilities, and an open software development kit (SDK) system that allows providers to customize and integrate operations with their own management systems. For a list of related Junos OS documentation, see[link removed by ].
As part of the mobile backhaul, the ACX Series router at the cell site and the MX Series router at the aggregation layer provide comprehensive end-to-end Ethernet, MPLS, and OAM features with the one Junos OS running on both platforms.
The compact routers are one rack unit (U; that is, 1.75 in., or 4.45 cm) tall. Several routers can be stacked in a single floor-to-ceiling rack for increased port density per unit of floor space.
The chassis is a rigid sheet metal structure that houses all the other router components. The chassis measures 1.75in. (4.45cm) high, 9.4in. (24cm) deep, and 17.5in.(44.5cm) wide. The outer edges of the mounting brackets extend the width to 19in.(48cm) (from the front-mounting brackets to the rear of the chassis). The chassis installs in standard 300-mm deep (or larger) enclosed cabinets, 19-in. equipment racks, or telco open-frame racks.
Certifications & Standards
Safety Approvals:
CAN/CSA-C22.2 No. 60950-1
UL 60950-1
EN 60950-1
IEC 60950-1 - CB Scheme
EN 60825-1
EMC:
AS/NZS CISPR22 Class A
EN55022 Class A
VCCI Class B
FCC Part 15 Class A
Immunity:
EN-61000-3-2
EN-61000-3-3
EN-61000-4-2
EN-61000-4-3
EN-61000-4-4
EN-61000-4-5
EN-61000-4-6
EN-61000-4-11
ETSI:
ETSI EN300386-2
ETSI EN 300 019-2-1 (2000)
ETSI EN 300 019-2-2 (1999)
ETSI EN 300 019-2-3 (2003)
ETSI EN 300 019-2-4 (2003)
ETS 300753 (1997)
NEBS:
SR-3580 NEBS Criteria Levels (Level 3 Compliance)
GR-63-CORE
GR-1089-CORE
GR-3108-CORE
Telecomm Compliance:
RTTE Directive 1995/5/EC
FCC Part 68
Industry Canada CS-03
JATE Green Book
TBR 21 (XDSL only)
TBR 12/13
ACA TS016
G.703
MEF Compliant:
MEF 9
MEF 14
MEF 21
