CISCO UCS-FI-6296UP 96-PORT 1920GBP/S FABRIC INTERCONNECT SWITCH +2 E16UP MODULE For Sale


CISCO UCS-FI-6296UP 96-PORT 1920GBP/S FABRIC INTERCONNECT SWITCH +2 E16UP MODULE

Buy Now

CISCO UCS-FI-6296UP 96-PORT 1920GBP/S FABRIC INTERCONNECT SWITCH +2 E16UP MODULE:
$134.95

TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
Unit has been reset to factory default, see console log below. Unit has regular wear and tear.

COMPONENTS INCLUDED IN THIS sale:• (1) - CISCO UCS-FI-6296UP 96-PORT FABRIC INTERCONNECT SWITCH
• (2) - CISCO UCS E16UP MODULE
• (4) - UCS-FAN-6296UP FAN MODULES
• (2) - UCS-PSU-6296UP-AC 1100W AC POWER SUPPLY
• (2) - POWER CORD

REPLACEMENT or MONEY BACK GUARANTEE:When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.

ADDITIONAL INFORMATION:The following is the Console Log from this item:

N5000 BIOS v.3.6.0, Wed 05/09/2012, 03:15 PM

B2
B2

Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
Booting kickstart image: />.0.3.N2.3.11h.bin....

Usage: init 0123456SsQqAaBbCcUu
INIT: [ 10.316629] I2C - Mezz present
Starting system POST.....
Executing Mod 1 1 SEEPROM Test:...done (0 seconds)
Executing Mod 1 1 GigE Port Test:....done (33 seconds)
Executing Mod 1 1 PCIE Test:.................done (0 seconds)
Mod 1 1 Post Completed Successfully
POST is completed
can\'t create lock file /var/lock/mtab~208: No such file or directory (use -n fla
g to override)
S10mount-ramfs.supnuovaca Mounting /isan 3000m
Mounted /isan
Creating /callhome..
Mounting /callhome..
Creating /callhome done.
Callhome spool file system init done.
nohup: redirecting stderr to stdout
autoneg unmodified, ignoring
autoneg unmodified, ignoring
Checking all filesystems....r.rr done.
Checking NVRAM block device ... done
The startup-config won\'t be used until the next reboot.
.
Loading system software
Uncompressing system image: />0.3.N2.3.11h.bin

Loading plugin 0: core_plugin...
Loading plugin 1: eth_plugin...
Loading plugin 2: fc_plugin...


13+1 records in
13+1 records out
10240 bytes (10 kB) copied, 5.9316e-05 s, 173 MB/s
ethernet end-host mode on CA
FC end-host mode on CA
n_port virtualizer mode.
INIT: Entering runlevel: 3
touch: cannot touch `/var/lock/subsys/netfs\': No
/isan/bin/muxif_config: fex vlan id: -f,4042
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
Added VLAN with VID == 4042 to IF -:muxif:-

sysmgr_set_envvar_non_sysmgr_srv failed
System coming up. Please wait..
Couldn\'t open shared segment for cli server
System is not ready. Please retry when system is ready.
Press F and hit to start shell in Forced mode.
[Note: Shell may not be fully functional in Forced mode]
---------------------
enabled fc feature
---------------------
2020 Dec 21 23:08:45 %$ VDC-1 %$ %USER-2-SYSTEM_MSG: CLIS: loading cmd files be
gin - clis
2020 Dec 21 23:08:48 %$ VDC-1 %$ Dec 21 23:08:47 %KERN-0-SYSTEM_MSG: [ 10.316
629] I2C - Mezz present - kernel
System is coming up ... Please wait ...
System is coming up ... Please wait ...
2020 Dec 21 23:08:54 %$ VDC-1 %$ %USER-2-SYSTEM_MSG: CLIS: loading cmd files en
d - clis
2020 Dec 21 23:08:54 %$ VDC-1 %$ %USER-2-SYSTEM_MSG: CLIS: init begin - clis
System is coming up ... Please wait ...
System is coming up ... Please wait ...
System is coming up ... Please wait ...
System is coming up ... Please wait ...
System is coming up ... Please wait ...
System is coming up ... Please wait ...
System is coming up ... Please wait ...
System is coming up ... Please wait ...
System is coming up ... Please wait ...
System is coming up ... Please wait ...
System is coming up ... Please wait ...
System is coming up ... Please wait ...
System is coming up ... Please wait ...
System is coming up ... Please wait ...
System is coming up ... Please wait ...
2020 Dec 21 23:10:12 %$ VDC-1 %$ %VDC_MGR-2-VDC_ONLINE: vdc 1 has come online
System is coming up ... Please wait ...
nohup: appending output to `nohup.out\'
2020 Dec 21 23:10:17 switch %$ VDC-1 %$ %USER-2-SYSTEM_MSG: Running in PIO stats
mode - carmelusd

---- Basic System Configuration Dialog ----

This setup utility will guide you through the basic configuration of
the system. Only minimal configuration including IP connectivity to
the Fabric interconnect and its clustering mode is performed through these ste
ps.

Type Ctrl-C at any time to abort configuration and reboot system.
To back track or make modifications to already entered values,
complete input till end of section and answer no when prompted
to apply configuration.


Enter the configuration method. (console/gui) ?
Please Click Here to Visit Our StoreSearchBy37 - 226037 | Loc: E92 | L: Alberto |T: | PM: Nick | QTY: 0| Plan: 20% - NET of FEES |34.00\"x23.00\"x8.00\"68.00lbs |Start: $0.00 | BIN: $134.95 | |12/24/2020 ||Computers/Tablets & Networking::Enterprise Networking, Servers::Switches & Hubs::Network Switches

Buy Now


Other Related Items:



Related Items:

Cisco UCS-FI-6296UP Nexus 48-Port 10GbE SFP+ Switch 2X 1100W PSU picture

Cisco UCS-FI-6296UP Nexus 48-Port 10GbE SFP+ Switch 2X 1100W PSU

$209.00



Cisco UCS-FI-6296UP 48-Port 10G SFP+ Fabric Interconnect Switch 2x PSU  picture

Cisco UCS-FI-6296UP 48-Port 10G SFP+ Fabric Interconnect Switch 2x PSU

$137.74



Cisco UCS-FI-6296UP - UCS 6200 Fabric Interconnect Switch - SAME DAY SHIPPING picture

Cisco UCS-FI-6296UP - UCS 6200 Fabric Interconnect Switch - SAME DAY SHIPPING

$289.95