Juniper Networks IDP800 Intrusion Detection Prevention Appliance ***TESTED*** For Sale


Juniper Networks IDP800 Intrusion Detection Prevention Appliance ***TESTED***
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

Juniper Networks IDP800 Intrusion Detection Prevention Appliance ***TESTED*** :
$920.00

  • Home
  • About Us
  • Payment
  • Shipping
  • Returns
  • response
  • Contact Us
  • Welcome to GreenTekSolutions-B
  • Add to Favorites
Store Categories
  • HP (22)
  • Networking (110)
  • Processors (2)
  • Intel (2)
  • Dell (37)
  • Servers (17)
  • IBM (6)
  • SAS (1)
  • SSD (2)
  • SATA (3)
  • Switch (12)
  • Qlogic (1)
  • SUN (1)
  • Hard Drive (12)
  • Cisco (41)
  • Foundry (1)
  • Telecom (1)
  • Juniper (6)
  • NVIDIA (1)
  • KVM (1)
  • EMC (1)
  • Brocade (2)
  • Router (1)
  • APC (2)
  • Lenovo (1)
  • Laptop (2)
  • Other (34)
Juniper Networks IDP800 Intrusion Detection Prevention Appliance ***TESTED***
Description Do you have excess I.T equipment? Sell it to us!
The BEST in Buyback Programs!

GreenTek Solutions LLC
Call us today for more information.

Our Hassle-free buyback program offers:

  • Free evaluation of your I.T equipment!
  • Purchase of I.T equipment in its current condition!
  • Shipping or pick-up is on us!
  • Free recycling of out of date equipment!

Item Description

This item is in used but good working condition. It was pulled from a working environment. Since this item is in used condition, it is possible that it can show some normal signs of wear, for example: scratches or scuffs but nothing that will affect performance.

We offer a 30 day satisfaction guaranteed warranty on all the items listed in our store. If for some reason you're not happy with your purchase, please don't hesitate to contact us and we will try our best to fix it.


Included Items

1x Juniper Networks IDP800 Appliance

2x Power Cord

1x Console Cable

1x Rack mount Kit

2x Ethernet Cables

1x Documentation Kit

1x Juniper Software restore image USB

Tech Specs
Boot Output

Starting

_ _
| | _ _ _ __ (_) _ __ ___ _ __
_ | | | | | | | '_ | | | '_ / _ | '__|
| |_| | | |_| | | | | | | | | |_) | | __/ | |
___/ __,_| |_| |_| |_| | .__/ ___| |_|
|_|
_ _ _ _
| | | ___ | |_ __ __ ___ _ __ | | __ ___
| | | / _ | __| / / / / _ | '__| | |/ / / __|
| | | | __/ | |_ V V / | (_) | | | | < __
|_| _| ___| __| _/_/ ___/ |_| |_|_ |___/

___ ____ ____ _ _ _ ____
|_ _| | _ | _ | || | / | _ __ |___ __ _
| | | | | | | |_) | | || |_ | | | '__| __) | / _` |
| | | |_| | | __/ |__ _| _ | | | | / __/ | (_| |
|___| |____/ |_| |_| (_) |_| |_| |_____| __,_|


boot:
Loading version 2.4.31-2P3idpSMP (root@loire) (gcc version 3.3.2) #1 SMP Fri Jul 15 18:50:07 PDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000e7ed0000 (usable)
BIOS-e820: 00000000e7ed0000 - 00000000e7ee9000 (ACPI data)
BIOS-e820: 00000000e7ee9000 - 00000000e7f00000 (ACPI NVS)
BIOS-e820: 00000000e7f00000 - 00000000e8000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000118000000 (usable)
Warning only 4GB will be used.
Use a PAE enabled kernel.
1152MB HIGHMEM available.
2944MB LOWMEM available.
found SMP MP-table at 000f63c0
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
hm, page 0009d000 reserved twice.
hm, page 0009e000 reserved twice.
On node 0 totalpages: 1048576
zone(0): 4096 pages.
zone(1): 749568 pages.
zone(2): 294912 pages.
ACPI: RSDP (v000 PTLTD ) @ 0x000f6380
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0xe7ee2817
ACPI: FADT (v001 INTEL 0x06040000 PTL 0x00000003) @ 0xe7ee8e88
ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0xe7ee8efc
ACPI: HPET (v001 PTLTD HPETTBL 0x06040000 LTP 0x00000001) @ 0xe7ee8f38
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0xe7ee8f70
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0xe7ee8fd8
ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050228) @ 0xe7ee40e6
ACPI: SSDT (v001 PmRef Cpu7Tst 0x00003000 INTL 0x20050228) @ 0xe7ee4040
ACPI: SSDT (v001 PmRef Cpu6Tst 0x00003000 INTL 0x20050228) @ 0xe7ee3f9a
ACPI: SSDT (v001 PmRef Cpu5Tst 0x00003000 INTL 0x20050228) @ 0xe7ee3ef4
ACPI: SSDT (v001 PmRef Cpu4Tst 0x00003000 INTL 0x20050228) @ 0xe7ee3e4e
ACPI: SSDT (v001 PmRef Cpu3Tst 0x00003000 INTL 0x20050228) @ 0xe7ee3da8
ACPI: SSDT (v001 PmRef Cpu2Tst 0x00003000 INTL 0x20050228) @ 0xe7ee3d02
ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050228) @ 0xe7ee3c5c
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050228) @ 0xe7ee2873
ACPI: DSDT (v001 INTEL GLENWOOD 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium(tm) Pro APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 Pentium(tm) Pro APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Using ACPI (MADT) for SMP configuration information
Kernel command line: auto BOOT_IMAGE=P3_2.4.31_SMP ro root=801 console=ttyS0,9600 CONSOLE=ttyS0 nmi_watchdog=1
Initializing CPU#0
Detected 2128.060 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4246.73 BogoMIPS
Memory: 3746396k/4194304k available (1821k kernel code, 53080k reserved, 439k data, 296k init, 785216k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 262144 (order: 8, 1048576 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
dump: Registering dump compression type 0x0
dump: mbank[0]: type:1, phys_addr: 0 ... ffffffff
dump: Crash dump driver initialized.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: Physical Processor ID: 0
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: Physical Processor ID: 0
CPU0: Intel(R) Core(TM)2 Duo CPU E6400 @ 2.13GHz stepping 0d
per-CPU timeslice cutoff: 182.84 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 4246.73 BogoMIPS
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: Physical Processor ID: 0
CPU1: Intel(R) Core(TM)2 Duo CPU E6400 @ 2.13GHz stepping 0d
Total of 2 processors activated (8493.46 BogoMIPS).
cpu_sibling_map[0] = 1
cpu_sibling_map[1] = 0
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
activating NMI Watchdog ... done.
testing NMI watchdog ... OK.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2128.1092 MHz.
..... host bus clock speed is 266.0136 MHz.
cpu: 0, clocks: 2660136, slice: 886712
CPU0
cpu: 1, clocks: 2660136, slice: 886712
CPU1
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xfd74e, last bus=20
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 11 14 15) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 11 14 15) *7
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *0, disabled.
PCI: Probing PCI hardware
testing the IO APIC.......................

.................................... done.
PCI: Using ACPI for IRQ routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
IA-32 Microcode Update Driver: v1.14
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
Journalled Block Device driver loaded
pty: 256 Unix98 ptys configured
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver (1.1-3 Jul 15 2005 18:52:19)
megaraid: v1.18k (Release Date: Thu Aug 28 10:05:11 EDT 2003)
megaraid: no BIOS enabled.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Fusion MPT base driver 2.05.16
Copyright (c) 1999-2004 LSI Logic Corporation
mptbase: 0 MPT adapters found, 0 installed.
Fusion MPT SCSI Host driver 2.05.16
dump: Registering dump compression type 0x2
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 295k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Red Hat nash version 3.2.6 starting
Loading libata module
Loading ata_piix module
/lib/ata_piix.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
ERROR: /bin/insmod exited abnormally!
Loading ahci module
PCI(00:1f.2): AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
PCI(00:1f.2): flags: 64bit ncq pm led clo pio slum part
ata1: SATA max UDMA/133 cmd 0xF882F500 ctl 0x0 bmdma 0x0 irq 17
ata2: SATA max UDMA/133 cmd 0xF882F580 ctl 0x0 bmdma 0x0 irq 17
ata3: SATA max UDMA/133 cmd 0xF882F600 ctl 0x0 bmdma 0x0 irq 17
ata4: SATA max UDMA/133 cmd 0xF882F680 ctl 0x0 bmdma 0x0 irq 17
ata1: dev 0 ATA-7, max UDMA/133, 145226112 sectors: LBA48
ata1: dev 0 configured for UDMA/133
ata2: no device found (phy stat 00000000)
ata3: no device found (phy stat 00000000)
ata4: no device found (phy stat 00000000)
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
Vendor: ATA Model: External Disk 0 Rev: 1.15
Type: Direct-Access ANSI SCSI revision: 05
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
Partition check:
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
MountingEXT3-fs: INFO: recovery required on readonly filesystem.
/proc filesysteXT3-fs: write access will be enabled during recovery.
m
Creating root device
Mounting root filesystekjournald starting. Commit interval 5 seconds
m
EXT3-fs: sd(8,1): orphan cleanup on readonly fs
EXT3-fs: sd(8,1): 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 296k freed
INIT: version 2.78 booting
Welcome to Juniper Networks IDP
Press 'I' to enter interactive startup.
Mounting proc filesystem: [ OK ]
Unmounting initrd: [ OK ]
Configuring kernel parameters: [ OK ]
Setting clock (utc): Wed Jan 4 14:23:30 PST 2017 [ OK ]
Setting hostname localhost: [ OK ]
Your system appears to have shut down uncleanly
Press Y within 1 seconds to force file system integrity check...
Checking root filesystem
/dev/sda1: clean, 29540/684096 files, 114740/1365517 blocks
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Finding module dependencies: [ OK ]
Checking filesystems
/dev/sda2: recovering journal
/dev/sda2: Clearing orphaned inode 22 (uid=0, gid=0, mode=0100600, size=54)
/dev/sda2: Clearing orphaned inode 20 (uid=0, gid=0, mode=0100600, size=54)
/dev/sda2: Clearing orphaned inode 19 (uid=0, gid=0, mode=0100600, size=54)
/dev/sda2: Clearing orphaned inode 18 (uid=0, gid=0, mode=0100600, size=54)
/dev/sda2: Clearing orphaned inode 17 (uid=0, gid=0, mode=0100600, size=54)
/dev/sda2: Clearing orphaned inode 16 (uid=0, gid=0, mode=0100600, size=54)
/dev/sda2: Clearing orphaned inode 15 (uid=0, gid=0, mode=0100600, size=54)
/dev/sda2: Clearing orphaned inode 14 (uid=0, gid=0, mode=0100600, size=54)
/dev/sda2: clean, 13/684096 files, 29690/1365525 blocks
/dev/sda5: recovering journal
/dev/sda5: clean, 804/684096 files, 33010/1365517 blocks
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /tmp] fsck.ext3 -a /dev/sda2
[/sbin/fsck.ext3 (1) -- /var] fsck.ext3 -a /dev/sda5
[ OK ]
Mounting local filesystems: [ OK ]
Configuring system for crash dumps [ OK ]
Saving crash dump (if one exists)
[ OK ]
Activating swap partitions: [ OK ]
Enabling swap space: [ OK ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Starting loadNics: [ OK ]
Setting network parameters: [ OK ]
Bringing up interface lo: [ OK ]
Bringing up interface eth0: [ OK ]
Bringing up interface eth1: [ OK ]
Bringing up interface eth2: [ OK ]
Bringing up interface eth3: [ OK ]
SIOCADDRT: File exists
Removing any stray pidfiles...ok
Starting apps...
using IDPDIR = /usr/idp
Setting NICs to defined settings...Done
Removing /dev/idp...
Starting IDP kernel module...
scio: setting sc_debug_level to 0x1
Management server(s): 192.168.1.1:7803
Creating virtual circuit for eth2
Sniffer mode enabled for vc 'eth2'
Creating virtual circuit for eth3
Sniffer mode enabled for vc 'eth3'
No policy found...remember to push one
"ive.oneTimePassword" is missing in /usr/idp/device/cfg/idp.cfg!

Starting /> Starting /> Starting /> Starting /> Starting /> Starting /> Initializing random number generator: [ OK ]
Synchronizing with time server: [ OK ]
Starting ntpd: [ OK ]
Starting snmpd: [ OK ]
Starting sshd: [ OK ]
Starting idprepservice: [ OK ]
Starting httpd: [ OK ]
Starting crond: [ OK ]

Juniper Networks IDP release 4.1r2a
(IDP)
Kernel 2.4.31-2P3idpSMP on an i686

idp.netscreen.com login: root
Password:
Last login: Tue Jan 3 22:21:57 on ttyS0
[root@idp root]#

Show Version Output

Product Name: NS-IDP-800
Serial Number: 0232052009000018
Software Version: 4.1.112010
IDP Mode: sniff
HA Mode: Disabled
Detector Version: 4.1.104259
Software License: Evaluation
Software Expiration Date: 4/25/2009

Show LIC Output

ID Machine ID Issue Date Expiration OK Feature
-- ---------------- ------------------------ ------------------------ ------- -------------------
1 Upgrade Tue Apr 25 00:00:00 2006 Sat Apr 25 00:00:00 2009 Y (2) idp_key

Notes:
(2) License has expired
[root@idp root]#

Show Version Output

scio 4.1.112010
kernel 4.1.112010

  • PAYMENT
  • SHIPPING
  • RETURNS
  • TERMS
  • GUARANTEE
  • ABOUT US
  • PAYMENT
  • PAYMENT

    • Only PayPal and major credit cards are accepted. (Amex, Visa, MasterCard)
    • Immediate Payment is required after the Winning offer
    • Item will be shipped immediately on the same or next business day of receiving full payment

  • SHIPPING
  • SHIPPING

    • Shipping within the 48 Contiguous United States is Free
    • International buyers are welcome.
    • Alaska, Hawaii and Puerto Rican buyers have to contact me for a shipping quote prior offerding.
    • P.O. Box Delivery is offered but is possible that there can be shipping charges.
    • APO/FPO Delivery is offered but is possible that there can be shipping charges.
    • PayPal Confirmed Addresses Only
    • Items Will be Shipped by USPS or FedEx on the Same or Next Business day of receiving full payment
    • UPS or FedEx Tracking Number will be provided

  • RETURNS
  • RETURNS

    "AS-IS" items have no warranty and do not qualify for refunds or exchanges. Refunds are only provided if a suitable replacement is not available. The buyer must notify GreenTek Solutions in writing (e-mails qualify) of any problem within the documented warranty period to qualify for refund or replacement. GreenTek Solutions is not obligated to offer warranty services beyond the stated warranty period. Return Authorization (RMA) is required for defective product returns. Credit for returned item will be issued after the return of the defective product.

    Upon receipt of Return Authorization, the buyer has 3 Business Days to ship item to us and provide tracking number via e-mail. GreenTek Solutions does not issue refunds for any form of shipping, either to or from the buyer. Items that are damaged while in the buyer's possession, regardless of circumstances, do not qualify for a refund or exchange. In addition, items damaged by improper packaging when returned to GreenTek Solutions will not qualify for refund or exchange.

    Items with Warranty: We affix "warranty labels" on all items that have a warranty. Evedince of tampering, removal or broken seal, will VOID the warranty.

  • TERMS
  • TERMS

    Texas buyers and local picked up customers at our office - GreenTek Solutions - will be charged 8.25% Sales Tax. Buyers are required to provide payment within 1 week from sale close, unless other arrangements are made. Late payments may result in order cancellation.

    International sales over $1000 will only ship after payment has cleared. International sales over $1000 will only ship after payment has cleared.

    PLEASE do not ask us to reduce the amount of the invoice for customs purposes, because we will not do it. We will only declare items purchased as a commercial sample, nothing else (gift, return, etc.).

  • GUARANTEE
  • GUARANTEE

    All of our items work for servers, Not for desktop. Buyer may return defective Goods for replacement or refund (as elected by Seller) within 30 days of purchase. Subject to Seller's reasonable approval, Buyer may return for credit within 30 days of purchase non-defective Goods the sales price of which, together with the sales price of any other non-defective items previously returned to Seller by Buyer, do not exceed 2% of the aggregate sales prices of all non-defective products purchased by Buyer from Seller. Non-defective, special order products are normally not accepted for return; other returns are handled on a case-by-case basis in Seller's sole discretion. All returns must be accompanied by an authorized RMA number, which is valid for 15 days after the date of issuance, and returns of non-defective normally stocked items in resalable condition will be accepted for credit subject to a restocking charge of no less than 15% of the sales price.

    A Return Material Authorization (RMA) number must be obtained for all returns. Please contact GreenTek Solutions RMA for assistance.

  • ABOUT US
  • ABOUT US

    GreenTek Solutions entirely eliminates the risk associated with electronic recycling by managing the entire process from pick-up to final destination. We recover, re-market and recycle technology from companies from all sizes, large public retail, government entities and education institutions.

Useful Links:
  • HOME
  • ABOUT US
  • PAYMENT
  • Shipping
  • RETURN
  • response
  • CONTACT US
Thanks for visiting
ABOUT US Sell us your IT Equipment! If you have any excess inventory, GreenTek Solutions is able to pay cash or arrange a consignment agreement for your items. Contact us directly for details regarding any inventory of value. If you have a list for excess inventory please add us to your distribution list and someone will reply in a timely manner.

Read More PAYMENT OPTIONS © Copyright 2017, GreenTekSolutions-B All rights reserved. store Designed & Developed By

Buy Now


Other Related Items:



Related Items:

Juniper Networks SA 2000 Secure Access SSL VPN Security Appliance picture

Juniper Networks SA 2000 Secure Access SSL VPN Security Appliance

$69.99



Juniper SRX345-SYS-JB Service Gateway 16GbE Ethernet Router 1 Year Warranty picture

Juniper SRX345-SYS-JB Service Gateway 16GbE Ethernet Router 1 Year Warranty

$535.00



Juniper SRX320 Services Gateway Security Appliance Hardware Only 1 Year Warranty picture

Juniper SRX320 Services Gateway Security Appliance Hardware Only 1 Year Warranty

$241.00